Symbols Used - Renfert Eco Guia De Inicio Rapido

Introduction
This quick start guide contains guidelines for use of the unit and relevant
safety information. For detailed information on the unit, please see the in-
structions for use which can be downloaded from our Internet page under
www.renfert.com.
EN

Symbols used

Danger
Immediate danger. Observe the accompanying documentation!
Warning
By not following the instructions the burner could become
damaged.
Mark of conformity DVGW (Deutscher Verein des Gas- und
Wasserfaches e.V.).
Safety
Intendet Use
Only for use with:
Liquid gas:
Natural gas E: Burner No. 935-0100
The burner has been certified and released in conformance with the
DVGW.
Product identification number: DG-2411CO 0243
Hazard Statements and Warnings
If the burner is not used according to the supplied instructions
for use, then the intended safety feature can no longer be guar-
anteed.
► Always pay attention to the accident prevention regulations stipulat-
ed by the respective trade organisations! (DVGW regulations).
► The burner should only be operated under constant supervision.
► Even when the gas valve (3) on the burner is closed, the gas flow is
not securely shut off.
► After use, the gas supply should be turned off immediately via the
gas shut-off valve at the laboratory workbench (gas isolation valve)
or by separating the gas connection safety valve.
► In classrooms, laboratory burners may only be used after turning on
all the lined up shut-off systems (central room shut-off, group shut-
off system, shut-off valve).
► Should a strong smell of gas be detected, close the gas shut-off
valve at the laboratory workbench immediately and initiate the
corresponding safety measures (see DVGW law and valid national
regulations).
Burner No. 934-0100