Olymp LavaSit DINER Shiatsu Instrucciones De Servicio página 11

b. Mains cable (230V/50Hz AC)
· The massage motors are plugged into a cover protected socket supplied by the customer via a
transformer/control unit with an external power cable.
· Optional: Cable conduit for floor anchoring (fig. 7) to reduce risk of tripping. Lay the power
supply cable from the shampoo unit through the conduit to the socket.
· If the shampoo unit is wall mounted (input and output water via installation shaft from the wall),
the power supply cable can be laid to the wall in the installation shaft and be plugged into a wall
socket there.
· When several units are installed in-line the power supply cable of one unit must not
be connected further to another unit!
Disposal:
Technical data:
Conformity:
Warranty:
For the correct disposal of this product, special national regulations or
ordinances may apply. Please observe these regulations carefully.
Mains voltage: Input 230 V AC +/- 10%, / 50 Hz
Power input: 60 W
Protective class: 1I, with aditional grounding connection
In accordance with the following European Directives, the product has been
CE marked:
2014/35 / EU Low Voltage Directive
2014/30 / EU Electromagnetic compatibility
2011/65 / EU RoHS Directive
The declaration of conformity is deposited with the distributor:
OLYMP GmbH & CO.KG
Hohenheimer Strasse 91-97
70184 Stuttgart
Note: in the course of product improvements, we reserve the right to make
technical and visual changes to the product
We grant one year warranty from the date of delivery. Otherwise, the statutory
provisions apply. The warranty expires in case of improper connection as well as
improper use.
GB
4