Jotul F 305 Serie Instrucciones Para Instalación página 10

ENGLISH
Fig. 9
C
A
2. Remove the gloves from the ash pan.
3. Lift the baffl e, ash retainer, and bag of screws out of the
burn chamber.
4. Check that the control handles (C) move freely.
5. Remove the bottom plate (A) by taking hold of the front
left corner. Lift up the plate and remove it from the base
at an angle.
6. Remove the four transport screws (B) that fasten the oven
to the wooden pallet.
7. Lift the oven from the pallet and set it up (see fi g. 1).
10
B
Fig. 10
8. Adjust the base with the height adjustment screws using
the hex key placed in the bag of screws. NB! Take into
account the height of the fl oor plate.
9. Mark on the wall if there has to be a rear outlet for fl ue pipe
and external air supply (see fi g. 1). If there has to be a
rear outlet for fl ue pipe and/or external air supply, move the
oven from the wall and prepare the connections.
Approval label
Jøtul F 305 with base
Fig. 11
B
1. Take the approval label (A) out of the ash pan and fasten
it with the nut (B), as displayed. The nut needs to be
tightened only with the fi ngers. NB: Do not cut off the
wire used for fastening the label.
A