Jotul F 305 Serie Instrucciones Para Instalación página 21

Fig. 38
A
A
5. If a glass gasket or glass need replacement, fi rst remove
the door handle (see it. 2-4).
6. Unscrew the glass holder (B) that is attached with 4 screws
(A). NB: The glass in the door is loose. Be careful not
to knock the glass when the glass holder is loosened.
Fig. 39
B
7. Remove the glass (A) carefully. Remove the gaskets (B)
and (C), and clean the gasket grooves.
8. Glue on new gaskets.
Fig. 40
B
A
9. Remove the old gasket (A) and clean the grooves. Glue
on a new gasket.
10. Install back all parts once all damaged gaskets have been
replaced.
Adjusting the door
Fig. 41
C
A
1. The door can be adjusted upwards or downwards slightly
on the door lock side by forcing it into correct position.
NB! The door cannot be fully closed when adjusting it!
ENGLISH
21