Optional Extras; Recycling; Warranty - Jotul F 305 Serie Instrucciones Para Instalación

ENGLISH

8.0 Optional extras

8.1 Kit for outside air connection
Outside air connection, Ø80 mm - Cat. no. 51047509
Outside air connection, Ø 100 mm - Cat. no. 51012164
8.2 Soapstone top
Cat. no. 51048022, BP
Cat. no. 51049314, WHE
8.3 Ash lip for product with legs
Cat. no. 51047339, BP
Cat. no. 51047341, WHE
8.4 Protection grid for sweep ball
Cat. no. 151608 (Ø 150 mm)
8.5 Short legs
Cat. no. 51047318, BP
Cat. no. 51047340, WHE
22

9.0 Recycling

9.1 Recycling packaging
Your fi replace is delivered with the following packaging:
• A wooden pallet that can be cut up and burned in the
fi replace.
• Cardboard packaging that should be taken to a local
recycling facility.
• Plastic bags that should be taken to a local recycling facility.
9.2 Recycling the fi replace
The fi replace is made of:
• Metal that should be taken to a local recycling facility.
• Glass that should be disposed of as hazardous waste.
The glass in the fi replace must not be placed in a regular
source segregation container.
• Vermiculite burn plates that can be disposed of in regular
waste containers.

10.0 Warranty

Jøtul AS provides its customers with a ten-year warranty
with the right to return external cast-iron items if they show
defects as a result of faulty materials and/or manufacturing
after the initial purchase/installation of the fi replace. The buyer
is entitled to return the goods provided that the fi replace has
been installed in compliance with current laws and regulations
and in compliance with Jøtul's installation and operating
instructions.
The warranty does not cover:
The installation of optional extras, for example, to rectify local
draught conditions, air supply or other circumstances beyond
Jøtul's control. The warranty does not cover consumables,
such as burn plates, smoke baffl es, fi re grates, bottom grates,
brick refractories, dampers and gaskets as they deteriorate
over time due to normal wear and tear. The warranty does
not cover damage caused as a result of using unsuitable fuel
when lighting the fi re, such as driftwood, impregnated and
painted wood, plank offcuts, chipboard, etc.
may easily occur if unsuitable fuel is used, i.e. the fi replace
becomes red hot, which causes the paint to discolour and the
cast iron parts to crack.
The warranty is not valid for damage caused while the product
is in transit from the distributor to the delivery address. The
warranty is not valid either for damage caused by the use of
non-original parts.
Overheating