B.A. International SuPreme S50 Modo De Empleo página 3

Interference by an unauthorised party would nullify any implied warranty.
The manufacturer recommends to use original spare parts only.
4.3
A safe and proper operation of the unit can only be guaranteed by correct use of the relevant
burs, as outlined in these instructions. When using rotary tools the limit given by the manufacturer
must be observed. By using the reverse function the chuck can get loose while under heavy load!
Accident prevention regulations must be observed!
4.4
During use, national legal regulations must be observed, in particular:
• The applicable health and safety regulations
• The accident prevention measures (risk of injury from rotating tools, eye injuries)
• Wear safety goggles
• Use protective screen
• Hazard due to incorrectly stored handpiece
• Injury caused by tighened rotary instrument
• Damage to the clamping system from dropping the handpiece
4.5
Abnormal condition of the device or improper use may result in injury and threat of material and
equipment.
Unplug the unit before opening the housing.
• The repair and maintenance of the electrical parts of the unit may only be done by professio-
nally skilled and trained workers, informed of the safety guidelines. New spare parts, used in
repairing the unit must be in accordance with the manufacturer's required specifications.
• The user has to check the safety function and the proper condition of the device before each
use.
4.6
Only use drills, milling and grinding tools acc. to DIN EN ISO 1797-1!
Never use drills, milling- or grinding tools with worn shaft!
Respect the use-speed instructions of the manufacturer!
5. Electronics and Electrical Equipment Disposal
Based on the EC Directive 2002/96 on Waste Electrical- and Electronic Equipment we point out
that this product is subject to that Directive and must be performed to a particular waste dispo-
sal within Europe.
WEEE-Reg.-Nr. DE 81870190
6. Transportation Damages
1. The recipient notes the loss or damages immediately.
The recipient informs the delivery agent immediately about the damage.
2. Keep the product and the packaging unchanged.
3. Do not use the product.
4. Report the loss to the delivery agency.
5. Report the damage to the manufacturer
6. Return the damaged product only after consultation the manufacturer.