Step-By-Step With Automatic Reclosing Operating; Manual Step-By-Step With Stop Operating - CiA PCM100 Manual De Usuario

PCM100 / PCM130 - User Manual
3.2.3 STEP-BY-STEP WITH AUTOMATIC RECLOSING
One pulse allows : opening, pause, automatic closing
During opening and closing procedures, every pulse stops and reverse the movement of the
gate immediately.
During the pause, a pulse recloses the gate immediately.
GATE
STATUS
Total Opening and
CLOSE reclosing after the time
OPENING
OPEN
IN PAUSE
It is locked and only a new pulse recloses the
CLOSING
Restarts the operating procedure before the
IN STOP
3.2.4

MANUAL STEP-BY-STEP WITH STOP operating

One pulses opens; the next pulse stops; the next pulse closes ; the next pulse stops; the
next pulse opens, etc .
GATE
STATUS
CLOSE
OPENING
STOP
CLOSING
Restarts the operating procedure before the
IN STOP
28
PULSE A PULSE B
Partial Opening and
closing operation after
of pause
the time of pause
The opening is stopped and the next pulse
recloses the gate
Recloses the gate immediately
gate
STOP (closing or opening)
PULSE A PULSE B
Partial Opening
Total Opening
The opening is stopped and the next pulse
recloses the gate
Reverses the movement of the motor
The closing is stopped and the next pulse
opens the gate
STOP (closing or opening)
STOP PHOTOCELL 1 PHOTOCELL 2
Disables A and B pulses
and disable opening
Stops operation
The reclosing is stopped and at the end of the
and switches to
pause, it restores other 5 sec. up to the reset
STOP mode
Stops operation and the gate opens immediately
The pulses A and B will be ignored.
The opening or closing operation are locked
STOP PHOTOCELL 1 PHOTOCELL 2
Disables A and B pulses
and disable opening
Stops operation
Pulses A and B are ignored and all movement
and switches to
STOP mode
Stops operation and the gate opens immediately
The pulses A and B will be ignored.
The opening or closing operation are locked
(SW1=OFF- SW2=ON)
ON
See SWITCH 3 pages 9 and 10
No Effect
(SW1=ON - SW2=ON)
ON
See SWITCH 3 pages 9 and 10
No Effect
are locked
DIP1