Beamz DMX240 Manual De Instrucciones página 9

1.5 SCENE COPY
1. Program enable.
2. Tap the Bank Up/Down button
to select the bank that contains
the scene you wish to copy.
3. Select the scene you want to
copy by tapping its Scene button.
4. Tap the Bank Up/Down button
to select the bank you wish to copy
the scene to.
1.6 DELETE A SCENE
1.7 DELETE ALL SCENES
1. Tap the desired Scene button to select the scene
you wish to delete.
2. Press and hold down the Auto/Del button. While holding down the Auto/Del
button, tap the Scene button that stores the scene you wish to delete.
When a programmed scene is deleted, all DMX channel in this scene is set to 0.
This function will reset all DMX channel to 0 output.
1. With the power off, press and hold down the Program and Bank Down buttons
at a time.
2. Apply power again, all scenes should be cleared.
5. Tap the MIDI/Rec button.
6. Tap the Scene button you wish to
copy the scene to.
9