Troubleshooting Guide - Simplicity JILL Instrucciones De Seguridad Importantes

Troubleshooting Guide

Please check each item below if you have trouble with your vacuum.
Unplug the vacuum from the power supply before servicing.
Problem
Suction power is weak.
The vacuum does not work.
Power cord does not rewind.
Power cord won't pull out of
the vacuum.
Specifications
Model: JILL
Rating: 120V/60Hz
Amps: 10
Register your warranty online at
Check Point
Vacuum bag
Wand or hose
Is the hose inlet inserted
into the suction opening of the
vacuum completely?
When the vacuum bag is full
or any of the accessories are
blocked, the over-heating
protection for the motor
is activated and automatically
shuts down the vacuum.
Power cord
Power cord
www.SimplicityVac.com
8
Possible Solution
If vacuum bag is
full, replace it.
If clogged or blocked,
remove the object.
Insert it completely.
Turn the vacuum off and
unplug the vacuum.
Check the vacuum
bag and accessories
and remove any
blockages. The
vacuum can be turned
on again after approximately
20 minutes.
Pull the power cord out a
little and press the cord
rewind button again.
Do not pull it out by force.
Rewind it a little by
pressing the cord rewind
button and try pulling it
out again.