Bluetooth Connectivity - XtremeMac Tango TRX Guía Del Usario

no sounD From sPeakers
Check audio source
Push the source button on the top of the unit or on the remote to
select the desired audio source.
Check volume level
Turn the control dial or use the remote to adjust the volume.
Check iPod/iPhone connection
Remove your iPod/iPhone from the dock connector and re-dock to
ensure a proper connection.
Check the iPod/iPhone
Try restarting your device and then re-docking to ensure a proper
connection.

BLuetooth connectIvItY

Check Bluetooth connectivity
Make sure your device is correctly paired with "Tango TRX" as the
device. You may need to consult the manual for your device for
further instructions on correctly pairing the device to Tango TRX.
Check pairing of multiple devices
Tango TRX can recognize only on device at a time. Make sure that
no other devices within range of the unit are currently paired with
Tango TRX. If you want to use a different device, you must disable
the Bluetooth on the device you do not wish to use.
Check Bluetooth range
Wall construction may interfere with the Bluetooth range. If you
are getting poor Bluetooth connectivity, try moving the unit to
different locations. For more information regarding Bluetooth
technology, visit the official Bluetooth Technology site at
www. bluetooth.com
Poor sound quality from playing via a computer
The Bluetooth from some computers is meant for use with
headphones and may not have high enough quality for high-
fidelity audio systems. For best results, plug your computer in
through the auxiliary line-in jack on the back of the unit.
12 12
IPU-TRX-13_user_guide_23950664C.indd 12-13
13 13
8/11/11 11:20:33 AM