Fuse Replacement; Battery Life Indicator; Battery Run Time; Infrared Remote Control) - Chauvet DJ Freedom Par Quad-4 Guía De Referencia Rápida

Freedom™ Par Quad-4 QRG EN
AC Power
Freedom™ Par Quad-4 has an auto-ranging power supply that works with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
Power Linking
For the maximum number of Freedom™ Par Quad-4 products that you can power
link at each voltage, see the User Manual or the sticker on the product.

Fuse Replacement

1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace
with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Battery Power
The Freedom™ Par Quad-4 comes with a rechargeable lithium battery for cable-
free operation.
Charging the
The battery charges whenever the product is plugged into a power source. If the
Battery
product is plugged in and not in operation, make sure the On/Off switch is in the
Off position.
For optimal battery life, charge the Freedom™ Par Quad-4 battery for 24
hours prior to initial use.
Battery Life
The battery life indicators are the 4 small green LEDs on either side of the
Indicator
<D-Fi™ AUTO Sync/Clear> button. The indicators show how much battery life
remains available. The drawing below provides a key to reading the battery life
indicators.
D-Fi™ AUTO
Sync/Clear Button
100% 75% 50% 25%
Maximum Run Time Maximum Run Time

Battery Run Time

Recharge Time
(all colors on) (single color on)
Up to 8 hours Up to 20 hours 6 hours
IRC-6 (Infrared
The Freedom™ Par Quad-4 can be operated with the CHAUVET® IRC-6. For
more information about the IRC-6, download instructions for the IRC-6 or the
Remote Control)
Freedom™ Par Quad 4 User Manual from
www.chauvetlighting.com/product-
.
manuals-literature/
4