Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
7. HORIZONTAL DISCHARGE INSTALLATION (INTERNAL BLOWER(S) O NLY)
Slide the blower to disengage its flange from the retaining bracket.
HD0270
Flip the
blower
and engage
its
flange
in the back wall retaining
bracket.
Using
a
5/16"
socket
and
the
screws previously removed, secure
the blower to the hood.
Plug the blower in.
NOTE FOR DUAL BLOWER HOOD ONLY: Cut off the plastic tie wrap on left motor cable.
8. INSTALLTHE ADAPTERAND THE TRANSITION(IF NEEDBE)
(INTERNALBLOWERHOOD ONLY)
Using standard 3/8" screws provided,
secure the adapter to the top (or
back) of the hood (2 screws for a
3W' x 10" adapter/damper
and
4 screws for a 4Y2"x 18Y2"adapter).
Seal the adapter to the hood using
duct tape. For round ducting, install
an appropriate sized transition and
seal the joints with duct tape.
HJ0013
9. INSTALLANKE60 REClRCULATION KIT (NONDUCTED INSTALLATION ONLY)
Refer to the installation sheet included with the recirculation kit for details.
-10-
Publicidad
Tabla de contenido
