Tabla de contenido
Publicidad
CD / MP3 DISC PROGRAMMING
UP TO 40 TACKS CAN BE PROGRAMMED FOR DISC PLAY IN ANY ORDER. BEFORE USE, BE SURE TO PRESS
STOP
THE "
" BUTTON (14)
1.
SET IN CD MODE & STOP THE PLAYBACK.
2.
PRESS THE "MEM/CLK-ADJ" BUTTON (17) , " MEM " WILL APPEAR ON LCD DISPLAY (21). MOREOVER, IT
WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED – " 01 PR 01 ".
3.
SELECT A DESIRED TRACK BY PRESSING SKIP UP
4.
PRESS THE" MEM/CLK-ADJ " BUTTON (17) TO STORE THE TRACK INTO MEMORY.
5.
REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6.
WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS " BAND/
PLAY THE DISC IN ASSIGNED ORDER.
7.
PRESS " STOP
" BUTTON (14) TO TERMINATE PROGRAM PLAY.
AFTER PROGRAM COMPLETE, PRESS "SKIP UP
TRACKS BEING PROGRAMMED.
PRESS " STOP
FOR MP3 DISC / FILE, PRESS THE " FOLDER / PRE-UP " BUTTON (16) TO SELECT THE 1
NEXT FOLDER DIRECTLY AND HENCE TO SPEED UP THE SONG SLECTION.
THE PROGRAMMING MODEL WILL AUTOMATICALLY STOP IF NO BUTTON IS BEING PRESSED IN A
PERIOD OF ABOUT 10 SECONDS AFTER PRESSING THE " MEM/CLK-ADJ " BUTTON (17).
PLAYBACK OF MP3 SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 FILE WHICH
STORED IN THE MEMORY MEDIA WITH USB CONNECTING PORT OR
SD/MMC MEMORY CARD.
1.
SET THE SYSTEM AT STANDBY MODE FIRST OR OTHER FUNCTION
EXCEPT SD OR USB MODE.
2.
PLUG-IN THE USB PEN-DRIVE WITH THE FACE UP & MAKE SURE IT
GOING INTO COMPLETELY OR INSERT THE MEMORY CARD IN THE
DIRECTION OF THE ARROW AS SHOWN IN THE LABEL ON THE
UNDERSIDE OF THE MEMORY CARD SLOT COVER. INSERT
STRAIGHT WITHOUT BENDING.
CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD
DAMAGE THE AUDIO SYSTEM OR THE STORAGE MEDIA (USB
THUMB DRIVE / SD/MMC CARD). CHECK TO BE SURE THE DIRECTION IS CORRECT BEFORE
CONNECTION.
3.
PRESS FUNCTIONS BUTTON (19) TO "
4.
THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER CONNECTING, AND
LCD DISPLAY (21) WILL SHOW THE TOTAL NUMBER OF MP3 FILES BEING DETECTED.
5.
REPEAT THE SAME PLAYBACK PROCEDURE AS PLAYING CD/MP3 DISC AS ABOVE.
REMARK
-
THE SYSTEM CAN DETECT AND READ THE FILE UNDER MP3 FORMAT ONLY THOUGH THE USB PORT.
-
IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3
ENCODING FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS
NOT A MAUFUNCTION OF THE SYSTEM.
-
USB PORT DOES NOT SUPPORT CONNECTION WITH USB EXTENSION CABLE AND IS NOT DESIGNED
FOR COMMUNICATION WITH COMPUTER DIRECTLY
" BUTTON (14) AT CD STOP MODE TO CANCEL ALL PROGRAMMED MEMORY.
MCD1700 / English instruction manual
OR DOWN
OR DOWN
" SD CARD MODE OR "
ENG 6
BUTTONS (2).
" BUTTON (15) TO
" BUTTON (2) TO REVIEW THE
ST
" USB MODE.
TRACK OF
Publicidad
Tabla de contenido
