Tabla de contenido
Publicidad
B) PHONO ENCODING
1)
SELECT " PHON/AUX " MODE AND THEN PRESS THE "
2)
THE LCD DISPLAY (21) WITH SHOW "
THE SYSTEM IS STARTING THE ENCODING MODE.
3)
START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORD TO USB POSITION.
4)
AFTER FINISH OF RECODING, PRESS THE "
(21) STOP FLASHING AND RETURN TO " PHON/AUX " MODE.
C) CASSETE ENCODING
1)
SELECT " TAPE " MODE AND THEN PRESS THE"
2)
THE LCD DISPLAY (21) WITH SHOW "
THE SYSTEM IS STARTING THE ENCODING MODE.
3)
START PLAYBACK OF CASSETTE TAPE WHICH THE TRACK YOU PREPARE TO RECORD.
4)
AFTER FINISH OF RECODING, PRESS THE "
(21) STOP FLASHING AND RETURN TO " TAPE " MODE.
D) RADIO ENCODING
1) SELECT " TUNER " MODE AND THEN SELECT THE DESIRE RADIO STATION
2) PRESS THE"
REC " BUTTON (3) TO START THE ENCODING.
3)
THE LCD DISPLAY (21) WITH SHOW "
THE SYSTEM IS STARTING THE RECORDING.
4)
AFTER FINISH OF RECODING, PRESS THE "
(21) STOP FLASHING AND RETURN TO " TUNER " MODE.
REMARK:-
-
IF THE RADIO RECEPTION SIGNAL IS NOT STRONG ENOUGH, THE SYSTEM CANNOT START THE
ENCODING PROCESS AND THE TEXT " NO GOOD " WILL SHOW ON THE LCD DISPLAY (21).
-
THE RECRODING QUALITY AND PERFORMANCE FOR RADIO ENCODING IS NOT STABLE DUE TO
INTERFERENCE OF RADIO RECEIPTION. THIS IS NOT A MAUFUNCTION OF THE SYSTEM.
-
DUE TO THE INTERFERENCE, THE SYSYTEM WAS NOT ABLE TO ENCODE AM RADIO.
E) AUX-IN ENCODING
CONNECT ANOTHER AUDIO DEVICE, E.G. (PORTABLE) CD PLAYER, MP3 PLAYER, (PORTABLE) CASSETTE
PLAYER, IPOD, ETC. TO THIS SYSTEM VIA A CORD WITH 3.5MM DIA JACK PLUGS (NOT SUPPLIED).
CONNECT ONE END OF THIS CORD TO THE 3.5MM DIA. HEADPHONE JACK ON THE EXTERNAL DEVICE AND
THE OTHER END TO THE 3.5MM AUX-IN JACK (11) ON THE SIDE OF THE UNIT.
WHEN CONNECTED IN THIS WAY IT IS POSSIBLE TO:
PLAY BACK THE MUSIC ALREADY ON THE CONNECTED DEVICE.
•
ENCODE AND CONVERT THE MUSIC FILES FROM THE CONNECTED DEVICE TO USB/SD INTO MP3
•
FORMAT.
FOLLOW THE SAME PROCEDURE AS DESCRIBED IN THIS MANUAL.
TRACK SEPARATION (BY REMOTE HANDSET)
YOU CAN DIVIDE THE RECORDING MUSIC FROM PHONO,TAPE OR RADIO TO USB/SD TRACK BY TRACE
DURING ENCODING. EVERY TIME WHEN PRESS THE "
REMOTE HANDSET DURING ENCODING FROM PHONO, TAPE OR RADIO TO USB/SD, THE SYSTEM WILL
GENERATE A NEW TRACK AND CONTINUOUS THE RECRODING. THE TEXT " PHONO ", " TAPE " OR " TUNER
" AT LCD DISPLAY (21) WILL FLASHING ONE TIME, IT MEAN THE UNIT IS CREATING A NEW TRACK
SUCCESSFULLY.
MCD1700 / English instruction manual
REC " BUTTON (3) DIRECTLY.
" & "
" AND FLASHING AFTER FEW SECONDS. NOW
STOP
" BUTTON (14) UNTIL THE TEXT ON LCD DISPLAY
REC " BUTTON (3) DIRECTLY.
" & "
" AND FLASHING AFTER FEW SECONDS. NOW
STOP
" BUTTON (14) UNTIL THE TEXT ON LCD DISPLAY
" & "
" AND FLASHING AFTER FEW SECONDS. NOW
STOP
" BUTTON (14) UNTIL THE TEXT ON LCD DISPLAY
" (TRACK SEPARATION) BUTTON ONCE AT
ENG 8
Publicidad
Tabla de contenido
