Display Energy Costs Tariff - brennenstuhl EM 235 Instrucciones De Utilización Y De Seguridad

The LC-display
i
electrical devices connected.
Note: The measureable range lies between 0.00 and 9,999. If this value is
exceeded, the indicators ---- and OVER will appear in the LC-display
The LC-display
i
devices connected in the power strip used energy.
Press and hold the FUNC-Button
i
counters for energy consumption and total time to 0.

Display Energy Costs Tariff 1

q
Note: Make sure that you have entered a value for electricity tariff 1 in the first field
(see "Enter Electricity Tariff 1"). Otherwise the costs for electricity tariff 1 cannot be
retrieved.
Press the FUNC-Button
i
TIME are shown in the LC-display
The LC-display
i
that was used by the electrical devices connected.
The LC-display
i
and connected electrical devices consumed energy in electricity tariff 1.
Press and hold the FUNC-Button
i
counters for energy costs at electricity tariff 1 and total time back to 0.
Display Energy Costs Tariff 2
q
Note: Make sure that you have entered a value for electricity tariff 2 in the first field
(see "Enter Electricity Tariff 2"). Otherwise the costs for electricity tariff 2 cannot be
retrieved.
Press the FUNC-Button
i
TIME are shown in the LC-display
The LC-display
i
that was used by the electrical devices connected.
The LC-display
i
Steckdosenleiste_Content_DE_GB_NL_SE_ES.indd 31
now shows the total energy costs that were consumed by the
2
also shows the total time (hours / minutes) that the electrical
2
for around 2 seconds in order to re-set the
3
until the indicators TOTAL PRICE 1 and TOTAL ON
3
.
2
now shows the total energy costs at electricity tariff 1 for energy
2
also shows the total time (hours / minutes) that the power strip
2
for around 2 seconds, in order to re-set the
3
until the indicators TOTAL PRICE 2 and TOTAL ON
3
.
2
now shows the total energy costs at electricity tariff 2 for energy
2
also shows the total time (hours/minutes) that the power strip
2
Operation
.
2
GB 31
23.07.14 13:23