Changing The Domestic Hot Water Temperature; Selecting The Principal Display - De Dietrich CDR4 Instrucciones De Instalación, Utilización Y Mantenimiento

3. Operating instructions
%
0 2 4 6 8 10 12
$
MODE
EN
+
MODE
1 2 3 4
%
0 2 4 6 8 10 12 14
$
MODE
+
MODE
44
14 16 18 20 22 24
°C
A000852-A
5"
A000857-A
5 6 7
16 18 20 22 24
C002542-B
5"
A000857-A
3. Turn the rotary button to set the room temperature.
Setting is done in steps of 0.1°C. The correction range is between
+ and -5 °C compared with the temperature displayed.
4. To confirm, press the rotary button.
3.2.4. Changing the domestic hot water
temperature
CAUTION
Function available depending on the model of control panel.
In the factory, the domestic hot water temperature is set to 55°C. Setting
can be done from 10 to 80°C in steps of 1°C.
To modify the domestic hot water temperature, proceed as follows:
1. Press the MODE and r keys simultaneously for 5 seconds. The 0
menu is displayed.
2. Press the rotary button to display the menu 1.
To go back to the previous display, press the key r.
3. To modify the setting, turn the rotary button.
4. To return to the principal display, press the MODE key or wait 20
seconds.
3.2.5.

Selecting the principal display

In the factory, the principal display is set to show the current time and
the outside temperature.
Other settings available:
4 The current time and the room temperature
4 The current time and alternately, every 5 seconds, the outside
temperature and the room temperature
To modify the principal display, proceed as follows:
1. Press the MODE and r keys simultaneously for 5 seconds. The 0
menu is displayed.
CDR4 - Package AD253 - Package AD284
23/06/2011 - 300020530-001-C