Work And Safety Instructions - Festo 8065075 Manual De Instrucciones

Ocultar thumbs Ver también para 8065075:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Hydraulic power pack with load sensing variable displacement pump and constant displacement pump
The hydraulic power pack may only be used:
For its intended purpose
When its safety functions are in perfect condition.
5

Work and safety instructions

General
Trainees should only work with the circuits under the supervision of an instructor.
Electrical devices (e.g. power packs, compressors and hydraulic power packs) may only be operated in
training rooms that are equipped with residual current devices (RCDs).
Observe the specifications included in the technical data for the individual components, and in
particular all safety instructions!
Malfunctions which might impair safety must not be generated when the device is operated for training
purposes.
Wear personal safety equipment (safety glasses, safety shoes) when working on circuits.
Mechanical safety
Switch off the power supply!
Switch off working and control power before working on the circuit.
Only reach into the setup when it's at a complete standstill.
Be aware of potential overtravel times for the drives.
Mount all of the components securely on the profile plate.
Make sure that limit valves are not actuated from the front.
Risk of injury during troubleshooting!
Use a tool such as a screwdriver to actuate limit switches.
Set all components up so that it is easier to activate the switches and interrupters.
Follow the instructions about positioning the components.
32
Malfunctions which may impair safety must be eliminated immediately!
© Festo Didactic 8068243

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

80650768073527

Tabla de contenido