Care And Cleaning - BLACK&DECKER FP2500 Manual Del Usuario

5. Fill feed chute with food. Select regular opening or wide-mouth, depending
upon size of food to be processed. Position food pusher over food (h or ha).
h
6. Select PUlSe, loW or HIGH; press firmly on food pusher to guide food
through processor, but do not force it.
note: Heavy pressure on the pusher does not speed the work; use the pusher
only as a guide. let the processor do the work.
7. When finished, press oFF/PUlSe and wait for disc to stop rotating before
removing cover. Twist cover toward
8. Carefully remove slice/shred disc. Unlock workbowl by turning it
counterclockwise and lifting it off the base.
9. Unplug appliance when not in use.
helpful tips When Slicing and Shredding:
• Before slicing round fruits and vegetables in the processor, cut a thin slice
from the bottom of the food to make it flat.
. Place food cut side down in feed chute.
• Remove seeds and pits before processing.
• Select foods that are firm and not overripe.
• Remove the core from hard vegetables, such as cabbage.
• When slicing thinner vegetables, cut them just short of the length of the feed
chute and stand them vertically in feed chute so they are solidly packed and
cannot turn or tilt.
• Shred hard cheeses at room temperature.
• Chill soft and semi-hard cheeses before shredding.
• After food has been processed, remove the cover and invert on countertop.
Remove the slice/shred disc before removing the workbowl from the
processor. Place the disc on top of the inverted workbowl cover.
uSinG the douGh bLade
This blade makes preparing dough and pastry efficient and time-saving.
1. Use this blade in the large workbowl. This blade does not extend to the
outside rim of the workbowl, so it cannot incorporate flour when very small
amounts of flour are being processed.
8
oR
ha
to remove.
note: Use the metal blade for mixtures that contain less than 2 cups of flour.
2. Push dough blade down as far as it will go into workbowl.
3. Insert all the dry ingredients into the workbowl.
4. Place cover on workbowl. Add wide-mouth feed chute and food pusher.
Process to blend.
5. Add liquids through the small feed chute while machine is running.

care and cleaning

This product contains no user serviceable parts. Refer service to qualified
service personnel.
note: do not attempt to sharpen the cutting edges of the blades or discs.
They are permanently sharpened at the factory and will be ruined if
sharpened.
cLeaninG
note: Before cleaning, be sure unit is turned off and cord is unplugged.
• Completely disassemble processor parts before washing.
• Rinse parts immediately after processing for easy cleanup.
• Wipe base and feet with a damp cloth and dry thoroughly. Stubborn spots
can be removed by rubbing with a damp cloth and a mild, nonabrasive
cleaner. do not immerse base in liquid.
• All removable parts can be washed by hand or in a dishwasher. Hand
washing of plastic parts will help to maintain the food processor's
appearance.
• If washing by hand, fill workbowl with hot soapy water and rapidly raise
and lower the cutting blade and discs up and down on the center shaft.
• If washing in a dishwasher, place removable parts on top rack only – not in
or near utensil basket.
• Some staining of parts may occur. If so, make a paste of 2 tablespoons
of baking soda and 1 tablespoon of water. Apply to stains and let stand
overnight. Rinse and dry.
• do not use rough scouring pads or cleansers on any plastic or metal parts
to clean.
• do not allow blades or discs to soak in water for long periods of time.
• Remember to clean the internal shaft of the chopping blade; use a baby
bottle brush to remove any clogged food particles.
• If you are having trouble closing the cover over the workbowl, apply a small
amount of vegetable oil to the rim of the cover and workbowl. This should
make the pieces work smoother when attaching the cover to the bowl.
9