Channel Memory - Cobra MicroTalk PR4000WX Manual Del Propietário

Using Your Radio
Operation
Voice Activated Transmit (VOX)
Mode Button
In VOX Mode, your microTALK
used "hands-free," automatically transmitting
when you speak. You can set the VOX sensitivity
level to fit the volume of your voice and avoid
VOX Icon
transmissions triggered by background noise.
To Turn VOX Mode On or Off:
1. Press the Mode button until the VOX icon
flashes on the LCD. The current On or Off
setting is displayed.
Channel Button
2. Press the Channel Up or Channel Down
button to turn VOX On or Off.
3. a. Press the Mode button to enter the
selected On or Off setting and proceed
VOX Sensitivity Level
to other functions.
b. Press the Lock button to enter the
selected On or Off setting and return
to Standby Mode.
To Set the Sensitivity:
1. Press the Mode button until the VOX
icon flashes and the current sensitivity
level is displayed.
The current sensitivity level is displayed
with letters LE and a number 1 through
5, 5 being the most sensitive level and
1 being the least sensitive level.
2. Press the Channel Up or Channel Down
button to change the setting.
3. a. Press the Mode button to enter the selected
setting and proceed to other functions.
b. Press the Lock button to enter the selected
setting and return to Standby Mode.
14 English
•
® radio can be
Introduction Operation

10 Channel Memory

Your microTALK
locations (1 through 10) for storing your most
frequently used channels and privacy codes.
These memory channels can be selected
individually or can be scanned (see Using
Scan, page 18).
To Program Locations:
Mode Button
1. Press the Mode button until the Memory icon
and the memory channel location (1 through
10) flashes on the display screen.
2. Press the Channel Up or Channel Down
Memory Icon
button to set the memory channel location
(1 through 10).
3. Press the Lock button to enter the memory
channel location. The channel numbers
will flash.
Lock Button
4. Press the Channel Up or Channel Down button
to set the channel (1 through 22).
5. Press the Lock button to enter the channel
setting. The privacy code numbers will flash.
Channel Button
6. Press the Channel Up or Channel Down button
to set the privacy code (00 through 38).
7. Press the Lock button to enter the privacy
code setting.
8. a. Press the Mode button to enter the
memory channel setting and proceed
to other functions.
b. Press the Talk button to enter the memory
channel setting and return to Standby Mode.
To clear or un-program a memory location,
set both the channel and the privacy code to "00."
Customer Assistance Warranty
® radio has ten (10) memory
Nothing comes close to a Cobra ™
•
15