Care And Maintenance; Care And Maintenance Of The Chassis; Fabric Care In General - Kiddy Evostar Light 1 Manual De Instrucciones

EN
To mount the cover follow the steps for removing in reverse order.
Don´t forget to mount the 5-point belt system described in section
8.1. Attach the back panel (fig. 14, no. 2 + 3).

9. Care and maintenance

9.1 Care and maintenance of the chassis

Periodically check the chassis for loose screws, rivets or worn out or
defective parts. Check the fabric cover and belts for open seams or
other defects.
Don't use the stroller when you noticed a defect. Defective parts have
to be changed or repaired before using the stroller again. By spray-
ing some silicone oil onto the folding joints and wheel axles, the ease
of movement can be ensured and squealing noise are eliminated.
Wipe off unnecessary lubricant.
The chassis can be cleaned with a mild cleanser or with a damp cloth.
Never use caustic cleansing agents (e.g. solvents, strong detergents).

9.2 Fabric care in general

When the cover (or the chassis) is wet allow to dry unfolded at room
temperature before storing or using.
Fabrics should be cleaned in accordance to the care labels.
If the care label allows to wash the fabric, then use mild detergent
without bleach and warm water (30 °C). Please avoid spin-dry, tum-
ble dryer and iron. Instead hang out the fabric for air drying.
17