Setting Up Zeon ® Endeavour - Orascoptic Zeon Endeavour Instrucciones De Funcionamiento

SETTIng UP ZEon
SELECTING THE PROPER ADAPTER
The power supply is a medically rated, universal-input unit that accepts
100V - 240V AC nominal, providing an output voltage of 5V DC.
NOTE: Use only orascoptic supplied power supplies (part number 922011-1) to power the Zeon
Endeavour™. The appearance of your specific power supply and adapter set may vary slightly from
that shown . Select the proper adapter for your location:
ATTACHING THE ADAPTER TO THE POwER SUPPLY
Each adapter fits into a socket on the power supply.
1. Place the adapter in the socket of
the power supply .
2. Turn the adapter clockwise ntil it
clicks.
When correctly mounted, the adapter will not rock or move.
If the adapter feels loose, remove the adapter and re-install it.
OPERATING INSTRUCTIONS
Zeon endeavour™ Led Light SyStem
®
120v US — Type a
Euro — Type C
UK — Type G
australia — Type I
EnDEavOUR™
®
4
®