13.2.2. ROOM THERMOSTAT TRM-VP AND TRM-FA
13.2.2.1. USE
The room thermostat of the air conditioner regulates the room
temperature. It is designed for closed, dry rooms such as flats,
offices, etc.
Maximum acceptable relative humidity of the air : 95%. This value
should not be exceeded.
Avoid condensation.
13.2.2.2. SWITCHES
Switch 0 - I
²
ON "I"
²
OFF "0"
Linear switch
High Speed
Medium speed
Linear switch
²
COOLING
²
HEATING
13.2.2.3. DIMENSIONS
13.2.2.4. ELECTRICAL CONNECTIONS
Connection of the thermostat TRM-VP and TRM-FA.
²
Connections should be made according to the diagram (SEE APPENDIX).
²
Max. cross-sectional area of wires : 2.5 mm
13.2.2.5. WALL MOUNTING
²
Remove the thermostat control knob, the screw and the cover.
²
On a flat surface, mount the control panel using plugs and screws.
²
Install the cover, the screw and the thermostat control knob.
Lown Speed
2
15