Operating Check List; General; Electrical; Operating Voltage - Airwell K OG LN Manual De Instalación Y De Mantenimiento

15.2. OPERATING CHECK LIST

15.2.1. GENERAL

Cheek for any unusual noises or vibration in the running components, particularly the indoor fan drive system.

15.2.2. ELECTRICAL

15.2.2.1. OPERATING VOLTAGE

Recheck voltage at unit supply terminals.
15.2.2.2. CONTROL
1. Operate system and thermostat switches.
2. Check unit is wired for correct control of unit fan, cooling and heating modes.

15.2.3. FINAL CHECK

1. All panels and fan guards are in place and secured.
2. Unit clean and free of remainder installation material.

16. FINAL TASKS

If needed, fix the cables and the pipes on the wall with clamping collars.
Operate the air conditioner in the presence of the user and explain all functions.
Show him how to remove, clean and place back the filters.
It is not the manufacturer's policy to make recommendations in terms of water treatment (please contact a
specialised water treatment company).
However, given the critical nature of this subject, particular care should be taken to ensure that, if treatment
is required, it works effectively.
Using untreated or unsuitable water leads to excessive clogging inside the coil tubes (earth and mud deposits,
corrosion, etc.) with major consequences on the thermal efficiency of the unit and irreversible damage to the
equipment.
The manufacturer and its representative decline all responsability in the event of untreated or incorrectly treated
water being used.

17. IN CASE OF WARRANTY - MATERIAL RETURN PROCEDURE

Material must not be returned without permission of our After Sales Department.
To return the material, contact your nearest sales office and ask for a "return form". The return form shall be sent
with the returned material and shall contain all necessary information concerning the problem encountered.
The return of the part is not an order for replacement. Therefore, a purchase order must be entered through your
nearest distributor or regional sales office. The order should include part name, part number, model number and
serial number of the unit involved.
Following our personal inspection of the returned part, and if it is determined that the failure is due to faulty material
or workmanship, and in warranty, credit will be issued on customer's purchase order. All parts shall be returned to
our factory, transportation charges prepaid.
Take care
21