Safe Use - Garland Best 430 A Manual De Instrucciones

8. To always work with an extinguisher in the neighborhoods to be able to take
part in case of fire.
9. It never drives the desbrozador when it is tired, ill, altered, under the medicine
influence that can produce dream, or if it is under the influence of alcohol or
drugs.

SAFE USE

It is recommended to use the machine on the right side of the body, therefore the
exhaust gases will be expelled by the opposite side of the engine´s body. If it is
the first time using the brushcutter, a first period of training is advisable. Check the
machine previously to make sure there are not any loose or damaged pieces, or
fuel leaking. Replace damaged or excessively worn out accessories (blades,
nylon heads, protection pieces).
Ensure all maintenance and repairing jobs are carried out in an authorized service
center.
NOTE: In order to maintain the yield and the security of the machine, please make
sure to use original accessories and spare pieces.
Avoid excessive use of the brushcutter. Vibrations could cause damages.
1. Remove any stone, string, metallic piece or any other object that could get
entangled in the revolving pieces or could be dangerously thrown up from the
ground. Use only the recommended accessory for the type of vegetation to cut.
Do not allow that the disc touches any stone, metallic pieces, etc.
If you have long hair, collect it to avoid it from getting entangled in the machine.
Install the safety harness. Adjust the harness with the tensor in a way that the
brushcutter remains perfectly balanced in its right side and that the disc or the
head are parallel to the ground.
Always keep a firm position resting your feet, it is necessary to keep a stable
balance when using this machine.
Do not walk backwards when using the machine due to the evident risks that
this entails.
The lateral protector is essential for machines with delta handlebar when cutting
blades are used.
2. The holding ring should be kept in its original position to avoid unbalancing of
the machine. In provided models with "U" handlebar, the lateral handles can be
separately adjusted so its use will be more comfortable. (Read assembly
section).
3. If the brushcutter vibrates too strongly, stop the engine immediately. Check the
blades and the assembly nut.
4. The following accessories can be assembled to the brushcutter:
a) 2 nylon head.
b) Cutting disc.
27