2 Remote Control
2.1 Key introduce
1)
MUTE: Mute or Restore Audio Output.
2)
INFO:
Displays
additional
information.
3)
TTX: Displays Teletext Information.
DTV/VCR: Switches DTV and VCR
4)
output.
5)
SUBTITLE: Selects Subtitles Language.
6)
EXIT: Exits the current Menu or returns to
the previous Menu.
7)
OK: Confirms an entry or selection.
Displays the list of channels.
8)
RIGHT / LEFT: Navigates through the
Menus. Increases or decreases volume.
9)
TV/RADIO: Switches from TV function to
Radio function and from Radio to TV.
10) RECALL: Used to switch between the last
two viewed channels.
11) GOTO: Selects the play time of media.
12) PREV: Skips to the previous track during
playing media.
13) NEXT: Skips to the next track during
playing media.
14) REPEAT: Selects Repeat or turn off
Repeat mode.
15) STOP: Stops media play.
16) STANDBY: Switch the product to on or
standby.
17) EPG: (Electronic Program Guide)Turns the program guide on.
18) AUDIO: Selects an Audio Language or Audio Mode.
19) UP / DOWN: Navigates through the Menus. Selects the next or previous Channel.
20) MENU: Turns on Main Menu.
21) FAVOURITE: Turns on Favourite Menu.
22) 0-9 (Numeric Buttons): Selects a channel or setting.
channel
23) FWD: Searches forwards during media play.
24) REV: Searches backwards during media play.
25) PLAY: Starts or resumes media play.
26) PAUSE: Pauses media play.
27) COLOUR BUTTONS:
RED: Find function;
Yellow: Switch aspect ratio;
28) REC: Used to record the program.
29) LIST: Used to show the record program list on the current disk.
2.2 Installing the Batteries
Remove the battery cover from the Remote Control and put 2xAAA size batteries inside
the compartment. The diagram inside the Battery Compartment shows the correct way to
inst
all
the
batt
erie
s.
2.3Using the Remote Control
To use the Remote Control, point it towards the front of the Digital Set Top Box. The
Remote Control has a range of up to 7 metres from the Set Top Box at an angle of up to 60
degrees.The Remote Control will not operate if its path is blocked. Sunlight or very bright
light will decrease the sensitivity of the Remote Control.
2
Green: witch resolution;
Blue: Timer setting;