universalblue UVTBLANCO19-52 Manual De Instrucciones página 22

 If the chosen location does not have a suitable support beam capable of
supporting 45Kg, install a 2"x4" support between the roof beams as a support
medium.
 Make
sure
bracket for hanging the
fan to the ceiling or
other suitable structure
is capable of supporting
at least 45Kg, with the
two long fixing screws
included.
that at least 30 mm of
the screw is screwed
into the bracket.
Note: Fastening screws (included) are designed for use with the fan
and are fastened to wooden beams. If the installation is carried out on a
different material, it is advisable to use the appropriate fixing screws for that material
(these screws are not supplied with this equipment).
STEP BY STEP
Please consider the images for guidance only. In no case these images
correspond to the final model purchased.
Assembly of the blades (A)
1. Remove the accessory bag screws or unthread them from the bottom of the fan
frame (B). Depending on the model purchased, each blade may have 1, 2 or 3
screws.
2. Align the blades with the holes and tighten with the screws provided (1, 2 or 3
depending on the model). The blade is designed to fit perfectly. The screws must be
vertical to the blade. Tighten all screws to the blades evenly to prevent fan sway.
that the
Make sure
22