universalblue UVTBLANCO19-52 Manual De Instrucciones página 27

12. The 3 cables coming out of the signal receptor (I) (white, black and blue) must be
connected with the cables coming out of the support rod (E) . Once the joint has
been made, fix it with the caps provided, as shown in the image below:
After making the connections between the cables, please seal the joint with the
caps included with this appliance, so that the different cables do not touch
each other with the fleuron or other components.
13. Then use the terminal strip on the receiver bracket (G) to insert the 2 cables
coming out from the other side of the signal receptor (I).
14. The yellow and green (earth) cable coming out of the receiver bracket (G)
together with the cable of the same colour coming out of the support rod (E) , must
be inserted through the same fastening of the terminal strip (marked with the earth
connection symbol).
15. Using the strip, connect the cables on the wall to the fan, following the colours.
16. Assemble the upper canopy (D) on the receiver bracket (G) with the screws
previously removed.
27