Masterbuilt MWS 130S Manual Del Usuario página 42

Fig. 1
Pellet Hopper
Fig. 3
1. Turn off smoker and allow to cool to touch.
2. Remove cooking racks, water bowl, grease deflector and heat diffuser.
3. Clean out any ash, pellets or debris in crucible.
4. Turn unit on and set the cook cycle. Check that heating light is on.
• If heating light does not come on, contact Masterbuilt for support.
5. Element should begin to turn red. If element does not begin to turn red, check the connection to
controller. Reference "Controller Access / Replacement" instructions.
6. Repeat check after securing connection. If element still does not work, contact Masterbuilt for replacement.
42
Crucible
Auger Housing
Element
Panel
ELEMENT CHECK
Fig. 2
Controller
String