Fitting And Wearing Your Reflux Band - Somna Therapeutics Reflux Band Manual De Instrucciones

6.

FITTING AND WEARING YOUR REFLUX BAND

Reflux Band Fitting Kit
The Reflux Band Fitting Kit is used to set the pressure. It is comprised of two pieces; the External Manometer and
Pressure Sensor.
•
External Manometer: The External Manometer measures pressure being applied. The unit of measure is
millimeters of mercury (mmHg).
•
Display: The Display shows how much pressure the Reflux Band is applying to the criciod area, and thus the
UES. The recommended pressure setting is 20-30 mmHg.
•
Power Button: The Power Button turns on the External Manometer. It automatically turns off after two
minutes.
•
Pressure Sensor: The Pressure Sensor twists onto the External Manometer. The blue pad sits between the
cricoid area and the Reflux Band Cushion to measure the pressure applied.
Reflux Band Fitting Instructions
1 – Prepare for Fitting: Assemble Fitting Kit
•
Gently twist the end of the Pressure Sensor counter-clockwise onto the External Manometer.
•
The connected External Manometer and Pressure Sensor will detect and display the amount of pressure
being applied by the Reflux Band.
Page 3