Samsung NX58H9500W Serie Manual De Instalación página 28

Installation instructions
Step 8. Check the ignition of surface burners and oven burners
Check the operation of all cooktop and oven burners after the range has been
installed and assembled, gas supply lines have been carefully checked for leaks,
and electrical power cord has been plugged in.
All surface and oven burners have electronic ignition.
To turn on a surface burner:
Ignite the surface burner.
28 English
To start the bake burners:
01
1. Press the Bake or Roast or Bake button.
2. If necessary, use the number pad to change the default temperature (350 °F) to
between 175 °F and 550 °F.
3. Press the START/SET button.
• The gas oven preheats until it reaches the preheat temperature of 350 °F.
• When the preheat is complete, place the food in the gas oven, and close
the door.
4. When the cooking is complete, press the OFF/CLEAR button, and take out the
food.
NOTE
To change the temperature during cooking, repeat steps 1 through 3 above.
04
03
02