Water Drainage; Wireless Connection - Danby DPA100B9IWDB-6 Manual Del Propietário

OPERATING INSTRUCTIONS
AUTO RESTART
If the unit loses power unexpectedly, it will resume
the previous settings once power is restored.
When the unit has been turned off, it cannot be
restarted for 3 minutes to protect the internal
components.
LOUVER ADJUSTMENT
When the unit is turned on, the louver opens fully.
Press the swing button to being the louver
movement. The louver will swing up and down
automatically. Press the swing button again to stop
the automatic louver swing.
Please do not adjust the louver manually.

WIRELESS CONNECTION

This appliance can be controlled with a wireless
application on your wireless device.
Visit https://www.danby.com/support/#apps
to download the application and learn about its
operation.

WATER DRAINAGE

When the internal drain pan becomes full the
appliance will beep 8 times and the digital display
will show error code P1. The air conditioning or
dehumidifying action will stop but the fan may
continue to operate.
Ensure that the appliance is turned off and
unplugged and that it is close to a fl oor drain before
setting up any drain option.
1. Drain Plug
Remove the drain plug and allow the water to
completely drain. Replace the bottom drain plug,
pressing fi rmly to ensure a tight fi t and no leaks.
2. Continuous Drain
During dry mode, install continuous drain option so
that the appliance will automatically drain collected
water.
Remove the upper drain plug and attach the drain
hose that was provided with the appliance. Place
the open end of the drain hose over the receptacle
that the appliance will drain into; this could be a
basement fl oor drain, a sink or similar.
Ensure that there are no kinks or bends in the drain
hose and that it goes straight down toward the fl oor.
The continuous drain is activated by gravity only.
If the hose is not positioned directly downwards,
water will not drain correctly.
1
22
2