Assembly & Set-Up; Contents Of Carton - Cub Cadet JS 1150 Manual Del Operador

Assembly & Set-Up

Contents of Carton

• Jet Sweep Blower (1)
• Safety Glasses (1)
• Oil, 20 oz. (1)
• Fuel Stabilizer, 1/2 oz. (1)
NOTE: All references to the left or right side of
the jet sweep blower are from the operator's
position. Any exceptions will be noted.
Assembly
Attaching the Upper Handle
1. Remove the carriage screws (a) and
star knobs (b) from the carton. See
Figure 3-1.
Figure 3-1
• Carriage Screw (2)
• Star Knob (2)
• 90° Discharge Chute Attachment (1)
• Upper Handle (1)
2. Place the upper handle over the
lower handle, aligning the upper
holes/metal tabs in the upper handle
with the upper holes/lower holes in
the lower handle. Secure the upper
handle to the lower handle with the
carriage screws (a) and star knobs (b).
See Figure 3-2.
a
b
Set-Up
90° Discharge Chute Attachment
To redirect airflow at a 90° angle during
operation, a chute attachment is included
for optional use. See Attaching the Chute
Attachment on page 6.
•
•
•
•
Figure 3-2
Jet Sweep Blower Operator's Manual (1)
Jet Sweep Blower Fast Start Guide (1)
Engine Operator's Manual (1)
Product Registration Sheet (1)
Adding Oil
Refer to the Engine Operator's Manual for
information on adding and checking oil.
CAUTION:
Always check the
engine oil level before each use
as instructed in the Engine
Operator's Manual. Add oil as
necessary. Failure to do so may
result in serious damage to your engine.
Adding Fuel
Refer to the Engine Operator's Manual for
information on adding fuel.
WARNING!
Use extreme care
when handling gasoline.
Gasoline is extremely
flammable and the vapors are
explosive. Never fuel the
machine indoors or while the
engine is hot or running. Extinguish
cigarettes, cigars, pipes and other sources of
ignition.
3
5