KENMORE ELITE 385.19365 Manual De Instrucciones página 89

(Zipper Sewing continued)
[] Sew through all layers next to the fold. Stop just before
the zipper foot reaches the slider on the zipper tape
(about 2" (Scm)). Lower the needle slightly into the
fabric° Raise the zipper foot and open the zipper_
Lower the foot and stitch the remainser of the seam.
0 Slider
® 2" (5cm)
[] Close the zipper and spread the fabric flat wtih the right
side facing up. Baste the opened fabric and zipper tape
together
® Wrong side of upper fabric
Q Basting stitch
0 Right side of fabric
® Zipper tape
[] Move the zipper foot to the left pin.
Guide the edge of the foot along the zipper teeth and
stitch through the garment and zipper tape
Stop about 2" (5 cm) from the top of the zipper° Lower
the needle slightly into the fabric, raise the foot, remove
the basting stitches along the zipper opening, Open the
zipper to move the slider behind the zipper foot°
[] Lower the foot and stitch the remainder of the seam,
making sure the fold is even.
[]
®
[]
®
®
[]
®
®
78
[]