Airplay - Pioneer NC-50DAB Manual De Instrucciones

> Before Start > Part Names
®

AirPlay

1
Wi-Fi
2
> Install > Initial Setup
3
iPhone
Pioneer NC-50DAB
4
> Playback
Advanced Setup | Firmware Update | Others
Basic Operation
You can wirelessly enjoy the music files on an iPhone
®
iPod touch , or iPad
as this unit. Update the OS version on your iOS device to
the latest version.
1. Turn the unit on.
2. Connect the iOS device to the same network as this unit.
3. Tap the AirPlay icon
device and select this unit from the list of devices
displayed, and tap "Done".
0 This unit is displayed as "Pioneer NC-50DAB
XXXXXX".
0 If an "AirPlay Password" has been set on this unit,
enter the password you set.
4. Play the music files on the iOS device.
0 In the Setup menu displayed by pressing SETUP on the
remote controller, when "Option Setting" - "Power Off
Setting" - "Network Standby" is set to "On", when play of
AirPlay starts, this unit turns on automatically and play
starts.
0 Due to the characteristics of AirPlay wireless technology,
the sound produced on this unit may slightly be behind
the sound played on the AirPlay-enabled device.
0 SHUFFLE/REPEAT on the remote controller does not
work. Operate from the iOS device.
You can also play the music files on a computer with iTunes
(Ver. 10.2.2 or later). Make sure this unit and the computer
are connected to the same network, click the AirPlay icon
in iTunes, select this unit from the list of devices
displayed, and start play of a music file.
®
,
®
connected to the same access point
in the control center of the iOS
E
N
23