Front Panel - Pioneer NC-50DAB Manual De Instrucciones

> Before Start > Part Names

Front Panel

Part Names


1. Í STANDBY/ON button: Turns the unit on or to standby mode.
2. Power indicator: This lights blue when the unit is on.
3. Disc tray: Place discs here. 8-cm discs can also be used.
4. < button: Open or close the disc tray.
5. INPUT button: Switches the input to be played.
6. Display ( P6)
7. VOLUME dial: Adjust the volume. Adjust between 0 and 50.
8. Remote control sensor
9. PHONES jack: Connect stereo headphones with a standard plug (ø6.3 mm).
10.USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You
can also supply power (maximum 5 V/0.5 A) to USB devices with a USB cable.
0 When connecting a HDD that requires more than 5 V/0.5 A, connect to the USB port
(maximum 5 V/1 A) on the rear of the unit.
11. Play button:
: This button stops playback.
∫
> Install > Initial Setup
 
 
> Playback
  

/; : This button pauses the playback.
1
: Return to the beginning of the track being played. Press and hold to rewind the
:6
track quickly. (CD)
Move to the previous track. (USB, Music Server)
: Move to the next track. Press and hold to fast-forward through the track. (CD)
59
Move to the next track. (USB, Music Server)
0 Depending on the input, the operation may not start.
Advanced Setup | Firmware Update | Others

E
N
3