Publicidad
Idiomas disponibles
Idiomas disponibles
Features
Top Panel
1.
Platter: Place the slipmat
here, and then place your
record on the slipmat.
2.
Tonearm: The fixed tonearm
can be raised and lowered by
hand, or by using the raise /
lower lever.
3.
Arm
Clip:
This
designed arm clip secures the
tonearm when not in use.
4.
Raise / Lower Lever: Use
this to raise and lower the
tonearm on the record.
5.
Counterweight: This is pre-
balanced to provide proper
tracking for the stylus.
6.
7"/12"
Switch
Start/Stop: Adjust the 7"/12"
switch to select whether you
are using either a 7" or 12"
record. Press Start to have
the tonearm automatically lift,
swivel over the record, and
drop the needle at a specific spot based on the 7"/12" setting. When a record reaches the end or if Stop is
pressed during playback, the tonearm will automatically lift and return to the resting position.
7.
33/45 RPM Selector: Adjust this to select the RPM of the turntable platter based on the type of record you
are using.
8.
Volume: Adjust this to control the headphone and Bluetooth output level.
9.
Headphone Output: Connect headphones (sold separately) to listen to your vinyl playback.
10.
Bluetooth Button: Press this button to start Bluetooth pairing. If after 5 minutes no Bluetooth speaker can be
found to pair with, the Bluetooth transmitter will become inactive and the LED will turn off. If currently
connected, press this to disconnect from a currently connected Bluetooth speaker.
Rear Panel
1.
RCA Output: The audio from a playing
record is sent to the RCA audio output.
2.
Preamp On/Off: If your receiver or amplifier
has no phono inputs, switch on the preamp
(on). If the system you are using has phono
inputs, set this switch off.
3.
USB Audio Output: Use the included USB
cable to connect your turntable to your
computer. The USB connection will send
audio from the turntable to your computer. Please see the Operation > Computer Setup section of this
manual for information.
4.
Power Input: Use the included power adapter to connect to wall power.
5.
Power Button: Press this button to turn Pro100BT on/off.
specially
/
Auto-
7
9
1
10
10
8
1 2 3
5
4
3
2
6
6
STOP
START
7"
12"
6
4 5
5
Publicidad
