Operation - Dimplex XLF50 Manual De Uso

Operation

General Operation
WARNING: This electric
firebox must be properly installed
before it is used.
This firebox operates with
Comfort$aver
TM
which automatically adjusts the
fan speed and heater wattage to
safely and precisely match the re-
quirements of the room based on
the thermostat setting. The heater
operates such that once the room
reaches the set point, the fan and
heater will continuously run at a
low level, to maintain the desired
room temperature. If the tempera-
ture in the room rises significantly,
i.e. sun coming through a window
or a central furnace turns on, the
heater will turn off and periodi-
cally turn back on to circulate the
air around the unit, until the room
temperature drops and requires
the heater to be constantly on
again.
! NOTE: The unit is designed so
that the fan will run continuously
while the heater is on.
! NOTE: The element retains
heat after shutdown, there is a
built in cool down period of 2
minute before the fan shuts off
completely, when the heat func-
14
technology,
tion is turned Off.
Remote Operation
The fireplace is supplied with an
IR multi-function remote control.
! NOTE: To operate correctly,
the remote control must be point-
ed towards the front of the unit.
Controls
The unit can be controlled by
either the manual controls which
are located on the upper right of
the fireplace or the remote (Figure
8 & 8).
A. Standby
Turns the unit On and Off.
→ Activated by pressing the
Standby button on the remote
or the unit.
• The unit will turn On with the
same functions that it was set
to when it was turned Off and
the intake temperature will be
indicated on the Display.
! NOTE: When any button is
pressed on the unit the intake
temperature will be displayed on
the Display for 7 seconds.
B. Flame Effects
Turns the Flame Effect On and
Off.
www.dimplex.com