Eco Operation - Dimplex XLF50 Manual De Uso

Ocultar thumbs Ver también para XLF50:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation
room.**
E.
Temperature Up
Increases the temperature set-
ting.
→ Adjusted by repeatedly press-
ing the corresponding button
on the remote.*
• Indicated by the setpoint on
the Display increasing and the
speed of the fan increasing to
increase the amount of heat
being projected into the room.
* The first time the button is
pressed the current tempera-
ture set point will be displayed
for 2 seconds.
** The temperature can be ad-
justed from 5 °C to 37 °C (41
°F to 99 °F).
! NOTE: Holding the
buttons down for two sec-
onds, on the unit, will change the
temperature scale from °C to °F,
or vice versa.
F.

Eco Operation

Runs the heater in a reduced
wattage range when activated.
→ Adjusted by pressing the corre-
sponding button on the remote
when the heater is on.
16
• Indicated by the Display and a
reduced fan speed.
G.
Turns the Heater Boost On and
Off. Runs the unit at the full rated
wattage.
→ Activated and adjusted by
repeatedly pressing the corre-
sponding button on the remote.
• Indicated by the heater run-
ning at full heat, for a user set
amount of time, to quickly heat
up a cold room/space. The
Heat Boost can be set for a
maximum of 20 minutes, in 5
minute increments.
Disable Heat
If desired, depending on the
season, the heater on the unit can
be disabled. The function of the
and the
remaining controls will continue
to function as outlined in this
manual.
Pressing the
on the unit at the same time and
holding for 2 seconds will disable
and enable the heater.
! NOTE: When the heater has
been disabled and any of the heat
related functions are used, the
Display will indicate "---".
Heat Boost
and
www.dimplex.com
buttons

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Xlf74Xlf100

Tabla de contenido