Scanning Mixed Sized Documents - Olivetti OLISCAN A600 Guia Del Usuario

•
Reading using horizontal insertion
Place the cheque on the input tray
aligned along the right edge, with
the codeline
When this insertion direction is used, the
MICR codeline can be read optically
only.

Scanning Mixed Sized Documents

When scanning
alignment or jogging of the documents is decisive:
•
Make sure that documents are aligned at the
bottom as well as laterally on the right side, to
ensure that documents are fed regularly.
•
All documents have to be stacked at the feeder
entrance in reverse order, with the first page at the back so that it will
be the first page fed in (i.e. with first page in contact with the tray and
last page visible on top of stack). The auto-feeder can accommodate
up to 30 documents. When stacking more than 30 documents, fan out
the documents to ensure that feeding occurs in a regular manner.
NOTE: the MICR head for E13B codeline recognition is located on the right
side of the scanner. Cheques for processing must be placed with
the MICR facing upwards and on the right side of the scanner, as
shown in the image above.
When the host sends a Start command to the scanner, documents are
scanned on both sides after which the magnetic code line, if present, is
recognised and recorded. Documents are then deposited in the output tray,
in the same order and position in which they entered the scanner.
12
at the bottom
documents of
(1).
mixed sizes,
OLISCAN A600 - USER'S GUIDE
1