Troubleshooting; General Operating Problems; Scanner Does Not Power On; No Usb Connection - Olivetti OLISCAN A600 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 99
WARNING: Do not rub against the nozzles, or use unmoistened
paper, as the nozzles could become clogged.
7. Repeat the dabbing operation using
different parts of the paper towel until the
nozzle is clean, and the ink mark left on the
paper towel is uniform.
8. Reinstall the inkjet cartridge as described in the section "Installing a
Cartridge" on page 21.

TROUBLESHOOTING

General operating problems

Scanner does not power on

1. Make sure that the power unit cord is connected correctly to the power
socket on the scanner, and that the power unit is connected to the
electrical socket, and that the latter is correctly supplied with electricity.
2. Check that the green LED on the power supply is on.
3. Make sure that the power button at the rear of the scanner is in the ON
position.
Refer to the section "Powering on the Scanner" on page 10.

No USB connection

1. Check if the orange
ERROR LED (1) on
the Control Panel is
illuminated.
2. Make sure that the
USB connection cable from the PC is inserted correctly into the USB
port socket on the back of the scanner (see the section "Rear
Connections" on page 5.
18
1
OLISCAN A600 - USER'S GUIDE

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido