Basic Operations - Panasonic AW‑HE50HE Instrucciones De Uso

Basic operations

Menus are displayed on the monitor when the unit's settings
are to be selected.
The monitor is connected to the video signal output
connector.
The basic menu operations involve displaying sub‑menus
from the Top Menu items, and selecting settings on the
sub‑menus.
Some sub‑menus have menu items for performing more
detailed settings.
The menu operations are conducted using the wireless
remote control.
If a controller is connected, they can also be conducted
using the controller.
w p It may be necessary to upgrade the controller's version in
order to support the AW‑HE50.
For further details, consult with your dealer.
Described below are the basic operations for changing the
menu item settings using the wireless remote control and
controller (AW‑RP655, AW‑RP555 or AW‑RP50).
Table of operations
Wireless remote
Menu operation
control
Selecting the Press the [CAM1],
unit to be [CAM2], [CAM3] or
operated [CAM4] button.
Displaying the Press the [MENU]
Top Menu button for 2 seconds.
Selecting the
Press the [] or []
items
([] or []) button.
Displaying the
Press the [] button.
sub‑menus
AW‑RP655
Press one of the [1] to [5]
buttons of [CONTROL/
PREVIEW MONITOR OUT
SEL].
1. Press the [MENU] button.
The display on the
AW‑RP655's LCD panel
changes to the menu mode.
2. Turn the jog dial (main)
to display "CAMERA
SETTING" on the LCD
panel, and press the [OK]
button.
3. The scene selection menu
now appears on the LCD
panel so select the scene to
be set, and press the [OK]
button.
4. If the "OPEN CAMERA
MENU?  OK Key"
message appears on the
LCD panel, press the [OK]
button again.
Turn the jog dial (main).
Press the jog dial (main).
29 (E)
Only the steps taken using the wireless remote
control will be described here for the operations
conducted to select and set the items.
For details of the operations conducted using the
controller, substitute "controller" for "wireless
remote control" when reading the basic operations.
Also, refer to the Operating Instructions of the
controller.
Controller
AW‑RP555
Press one of the [1] to [5]
buttons of [CONTROL].
Press the [MENU] button for
2 seconds.
Press the [YES] or [NO] button. Turn the F1 dial.
Press the [ITEM] button.
AW‑RP50
Press one of the [CAMERA
STATUS/SELECTION] buttons.
Press the [CAMERA OSD]
button for 2 seconds.
Press the F1 dial.