Repair And Warranty - Megger BM15 Guia Del Usuario

REPAIR AND WARRANTY

The instrument circuit contains static sensitive devices, and care must be
taken in handling the printed circuit board. If the protection of an instrument
has been impaired it should not be used, and be sent for repair by suitably
trained and qualified personnel. The protection is likely to be impaired if,
for example, the instrument shows visible damage, fails to perform the
intended measurements, has been subjected to prolonged storage under
unfavourable conditions, or has been exposed to severe transport stresses.
New Instruments are Guaranteed for 1 Year from the
Date of Purchase by the User.
Note: Any unauthorized prior repair or adjustment will automatically
invalidate the Warranty.
Instrument Repair and Spare Parts
For service requirements for Megger Instruments contact:
Megger Limited
Archcliffe Road
Dover
Kent, CT17 9EN.
England.
Tel: +44 (0) 1304 502243
Fax: +44 (0) 1304 207342
ukenquires@megger.com
or an approved repair company.
Approved Repair Companies
A number of independent instrument repair companies have been approved
for repair work on most Megger instruments, using genuine Megger spare
or Megger
Valley Forge Corporate Center
2621 Van Buren Avenue
Norristown, PA 19403
U.S.A.
Tel: +1 (610) 676-8579
Fax: +1 (610) 676-8625
usenquires@megger.com
parts. Consult the Appointed Distributor / Agent regarding spare parts,
repair facilities and advice on the best course of action to take.
Returning an Instrument for Repair
If returning an instrument to the manufacturer for repair, it should be sent
freight pre -paid to the appropriate address. A copy of the Invoice and
of the packing note should be sent simultaneously by airmail to expedite
clearance through Customs. A repair estimate showing freight return and
other charges will be submitted to the sender, if required, before work on
the instrument commences.
End of life disposal
WEEE
The crossed out wheeled bin placed on the Megger products is a reminder not
to dispose of the product at the end of it's product life with general waste.
Megger is registered in the UK as a Producer of Electrical and Electronic
Equipment.
The Registration No is WEE/HE0146QT
Batteries
The crossed out wheeled bin placed on the batteries is a reminder not to
dispose of them with general waste at the end of their life.
This product contains eight alkaline AA batteries located in the battery
compartment on the rear of the instrument
Spent alkaline AA batteries are classified as Portable Batteries and should be
disposed of in the UK in accordance with Local Authority requirements.
For disposal of batteries in other parts of the EU contact your local
distributor. Megger is registered in the UK as a producer of batteries. The
registration number is BPRN00142
13