Eureka MIGNON Serie Instrucciones De Manejo página 33

EN
To pause the automatic dispensing before the grinding time has elapsed, press
the grinding start button (5) with the filter holder:
• Press the button (5) again to restart the dispensing for the remaining time.
• Keep pressed the button of the selected dose (blinking) to stop dispensing.
The grinding time goes back to the value set.
5.4.3 CONTINUOUS DISPENSING
Press the single dose (18)
access this mode.
The symbol (15)
The continuous dispensing lasts up to max 60 seconds.
To exit the continuous dispensing mode, keep pressed the single dose (18)
double dose(19)
5.4.4 LOCKING THE TIME
Press the buttons(16)
dose dispensing time adjustment stops. Furthermore, on the display the buttons (16)
and (17)
Press both buttons (16)
5.4.5 DOSE COUNTS
When starting the machine, keep pressed for 5 seconds the grinding start button (6) and
then select one of the counts:
• Single dose button (18)
• Double dose button (19)
• Single dose button (18)
of the dispensed continuous doses;
On the display, only the selected buttons remain on and the numbers of doses are
shown in pairs progressively.
For instance, if the dose total is 142536, the display shows the digits 14, 25, and 36
Libro 1.indb 133 Libro 1.indb 133
and double dose (19)
appears on the display.
button for some seconds.
and (17)
disappears.
and (17)
: access to the count of the dispensed single doses;
: access to the count of the dispensed double doses;
and double dose button (19)
. buttons at the same time to
. at the same time. When releasing them, the
again to unlock the functions.
or the
: access to the count
33
30/11/2020 11:47:20 30/11/2020 11:47:20