Display Contrast Adjustment - Eureka MIGNON Serie Instrucciones De Manejo

(each one for two seconds).
After the last digit pair, it stops for 4 seconds and then the sequence restarts.
To exit the count, press the grinding start button (6).
5.4.6

DISPLAY CONTRAST ADJUSTMENT

When starting the machine, keep pressed the grinding start button (6) and then press
the button (16)
only the buttons (16)
grinding start button (6).
5.5 GRINDING SETTING (FIG. A)
Turn the adjustment knob (7-8-9) clockwise for more finely ground coffee and counter-
clockwise for a coarser grind. The adjustment is to be made gradually, by grinding a little
coffee every max 2 notches.
If the knob is turned of a turn with the motor in standstill, the machine could stop.
The adjustment system EASY SETTING (8), if fitted, makes this procedure easier and
allows to adjust grinding in a quick and intuitive manner according to the required final
product.
5.6 POSITIONING THE FIXED FORK
Insert the filter holder fork (11) (Fig. 7) into its seat.
WARNING
Do not use the fork (12) (fig. 8) without having fixed it with the apposite screw.
5.7 FILTER HOLDER FORK ADJUSTMENT (FIG.6)
• Insert the filter holder fork (10) (Fig. 7) into its seat.
• With a screwdriver, loosen the fixing screw of the filter holder fork (6). Do not loosen
the screw completely.
• Lift or lower the fork to adjust it according to the filter holder dimensions.
• Once having found the correct position, tighten the fork fixing screw (10).
• The fork is suitable for any kind of filter holder available on the market.
34
Libro 1.indb 134 Libro 1.indb 134
or (17) to access the contrast adjustment. On the display,
and (17) To exit the contrast adjustment, press the
EN
30/11/2020 11:47:21 30/11/2020 11:47:21