Transcend 365 minicpap Auto Guía Rápida página 19

Transcend 365 miniCPAP Auto
Starting Therapy
Allow the 365 miniCPAP Auto to adjust to ambient temperature after removing it from
storage. To begin therapy, plug in the power supply to your 365 miniCPAP Auto and
press the center button to begin therapy. Press the down button to activate Ramp, if
desired.
Note: To begin therapy from the home screen, first ensure that no icons are
highlighted, then press the center button. You may also start therapy from any screen
by holding the center power button for three seconds.
Press center button
to begin therapy.
Note:
If the miniCPAP Auto™ device loses power while delivering therapy, the CPAP will
power on as soon as power is restored. The user must hit the Center button to resume
therapy.
Using the Ramp Function
1. Initiate Ramp by pressing the Down button after the Power button has been pressed
(CPAP is already delivering air pressure).
Note: The Ramp feature will not work unless your healthcare provider has preset the
Ramp function for you.
2.
Pressure from the device will be lowered to a preset starting pressure and will
gradually increase to your prescribed starting pressure.
3. To accelerate Ramp time, hold down the Down (Ramp) button. The device will quickly
increase pressure until reaching your prescribed therapy pressure.
TM
Quick Guide
Then press down
button to begin ramp.
19
ENGLISH
Page 19