Transcend 365 minicpap Auto Guía Rápida página 6

Transcend 365 miniCPAP Auto
Assembling the 365 miniCPAP Auto Device
Your mask connects directly to the 365 miniCPAP Auto™ via the air supply tube.
Follow these steps to assemble the Transcend 365 miniCPAP Auto™:
1. Connect your mask (sold separately) to an air supply tube with a standard 22 mm
connector (sold separately).
2. Connect the air supply tube directly to the 365 miniCPAP Auto™ device, making
sure it is fully seated.
3.
Plug the power supply into the 365 miniCPAP Auto™. Place device on a flat, stable
surface.
4. Connect the appropriate power cord to the power supply and connect the power
cord to a wall outlet.
Setting up the 365 miniCPAP Auto
Home Screen
When supplied with power, you will see
the LCD Home screen.
Center-Power, 'Select' button,
Home, and Therapy Mode
Up- Settings
Down- Humidification, Ramp Activation
Left/Back- Compliance Report
Right- Last Session Report
The top right white numbers on the Home screen show the set pressure (large number)
and the minimum and maximum pressures (small, lighter numbers - 4 and 20 in this
image).
TM
Quick Guide
6
ENGLISH
Page 5