Tabla de contenido
Publicidad
INSTRUCCIONES DE ARMADO:
:
1.PREPARACIÓN:
A. Antes de comenzar a armar el equipo, asegúrese de tener suficiente espacio
disponible a su alrededor.
B. Utilice el equipo de herramientas brindado para el armado
C. Antes de comenzar el armado, asegúrese de que todas las piezas estén disponibles
(verifíque las cantidades de cada pieza en la Lista de Partes de la hoja anterior).
2.INSTRUCCIONES DE ARMADO:
S13
S15
FIG.1
S13
20# M8*50 4PCS
16# d8*Φ20*1.5 4PCS
FIG.2
7
FIG.1:
Attach the front stabilizer (22) and the
rear stabilizer (24) to the main frame
(48) with carriage bolt (20)& (25) and
washer (16)；Attach the pedal to the
crank arms as shown in FIG.1,
CAUTION: be sure the right pedal
(37R) marked (R) is attached to the
right crank arm and tightened in the
clockwise direction.
The left pedal (37L) marked (L) is
attached to the left crank arm and
tightened
in
the
direction.
FIG.2:
Attach the the seat(27) to the seat
bracket(28)
with
nylon nut(30), then tighten
(27)
.slide the seat post(28) into the
vertical seat post(32) and at the
desired position,align holes and fix
in place with the locking knob(34)
and washer(33).
Insert the Seat Post
(32) into the main frame (48) and line
up the holes.
Secure the seat in
position with the Adjustment Knob
(36). The correct height for the seat
can be adjusted after the bike is fully
assembled.
anticlockwise
washer(16)and
seat
Publicidad
Tabla de contenido
