Making Changes With Function Mode; Switching The Function Mode; Setting Guide Tone (Guide Tone); Setting Time (Clock Adjust) - Fujitsu Ten ECLIPSE CD3100 Manual Del Propietário

Making changes with Function Mode

A variety of settings can be changed.

Switching the Function Mode

Press the [EQ/MENU] button for
1
more than one second.
The Menu Selection mode is activated.
Press the [SELECT] (Upper/Lower)
2
button to select the FUNCTION.
The funciton adjustment mode is
activated.
3
Press the [ENTER] button.
The function mode is activated.
Press the [SELECT] (Upper/Lower)
4
button to select the setting item.
When the button is pressed, the
setting item changes in the following
order.
AREA SHOT
CLOCK ADJUST ↔ DEMO ↔ HD
*2
↔ AUX
RADIO
STEERING SW ↔ SIRIUS ID
*5
ID
*1: Refer to page 36 for details on
Area shot operation.
*2: This setting can only be chosen
when an optional HD Radio tuner
unit is connected. (Refer to page
50 for details on HD Radio
operation.)
*3: Refer to page 61 for detail on AUX
operation.
*4: This setting can only be chosen
when an optional SIRIUS Satellite
radio tuner unit is connected.
(Refer to page 56 for details on
SIRIUS Satellite radio operation.)
*1
↔ GUIDETONE ↔
*3
↔ AUX SENSE ↔
*4
↔ XM

Making changes with Function Mode

*5: This setting can only be chosen
when an optional XM Satellite
radio tuner unit is connected.
(Refer to page 51 for details on XM
Satellite radio operation.)
Setting guide tone
(GUIDE TONE)
The main unit is set at the factory to emit a beep
tone in response to button operation. The guide
tone feature may be disabled in the following
procedure:
Press the [SELECT] (Upper/Lower)
1
button to select the GUIDE TONE.
2
Press the [ENTER] button.
The guide tone setting mode is
activated.
Press the [SELECT] (Upper/Lower)
3
button to select the guide tone ON/
OFF.
Press the [EQ/MENU] or [RTN]
4
button to exit function mode.

Setting time (CLOCK ADJUST)

This main unit uses the 12-hour display notation.
Press the [SELECT] (Upper/Lower)
1
button to select the CLOCK ADJUST.
2
Press the [ENTER] button.
The clock setting mode is activated.
Press the [SELECT] (Right/Left)
3
button to display the item to be
selected for adjustment.
Right: Minutes will be switched.
Left: Hours will be switched.
Press the [SELECT] (Upper/Lower)
4
button to adjust the time.
X
XI
45