Maintenance And Cleaning - brennenstuhl L2705 Instrucciones De Utilización Y De Seguridad

Troubleshooting and user notices
Problem
Light does not switch
on for movements in
the detection area.
Light switches itself on
for no obvious reason
(wrong trigger)
Note: All devices with a PIR sensor react more sensitively in colder weather than in
warm weather.

Maintenance and Cleaning

The LED spotlight does not contain any serviceable
components. The LEDs cannot be exchanged.
Please only use a dry or damp cloth for cleaning
and do not use solvents, acidic cleaners etc.
Disposal
Dispose of electrical goods in an environ-
mentally friendly way!
Do not dispose of electrical equip-
ment in the household waste!
In accordance with European Directive
2002 / 96 / EC relating to old electrical and elec-
tronic appliances, used electrical equipment must
be collected separately and recycled in an ecologi-
cally compatible way.
10 GB
LED-Leuchte_Content_L2705–2705 PIR_EU.indd 10
Possible cause
1. No grid power
2. Lighting close by is too bright.
3. Control set wrongly.
1. Heat sources such as air condi-
tion units, ventilation openings, out-
lets from heating units, barbecues,
other outside lights or passing cars
activate the movement sensor.
2. Animals / birds or pets.
3. Reflections from swimming
pools or other reflecting surfaces.
Recommended solution
Please check all connections and fuses /
switches.
Please reposition the motion detector newly
or change mounting area.
Reset sensor angle or readjust control.
Align the sensor head away from these sources.
A new alignment of the sensor head can be
helpful.
Realign movement sensor.
Contact your local authorities for information on
how to dispose of the appliance at the end of
product life.
Manufacturer
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 · 72074 Tübingen · Germany
H. Brennenstuhl S.A.S.
lectra-t ag
Blegistrasse 13 · CH-6340 Baar
For further information, we recommend you visit the
service section / the FAQs on our homepage
www.brennenstuhl.com
07.01.13 08:46