Publicidad
Idiomas disponibles
Idiomas disponibles
Checking
Water
Temperature:
• Your incoming
water
must be between
at least 120°F / 49°C and at most
150°F / 66°C
in order
to clean effectively
and prevent
damage
to your dishware.
Note:
The minimum
incoming
temperature
must be at 120°F/49°C
in order for the
detergent
to dissolve properly,
If you are unsure of the temperature
of your hot water:
1. Simply open the hot water
faucet and let it run for a minute and fill a glass.
2. Take a thermometer
and check the temperature
of the water.
3, If the temperature
is below
120°F / 49°C, then you need to adjust the water
temperature
on your water
heater in order to maintain
that temperature
level,
Overflowing
Protection:
• In case the water level is rising above the highest
acceptable
point,
the security
pressure switch will activate
the drain
pump automatically,
16
Publicidad
